Powered by |
Debian Jessie on Zotac Nano CI320Michel Casabianca - michel.casabianca@gmail.com
My MacBook Pro having some trouble, I started looking for a desktop machine to replace it. I enjoy the silence, low power consumption and processing power of my laptop ([Acer C720P] (http://sweetohm.net/html/debian-jessie-acer-c720p.en.html)) which integrates a Celeron CPU so I looked for a desktop machine with this type of processor. After careful consideration, I pulled the trigger for a Zotac Nano CI320 which integrates a [Celeron N2930] (http://www.cpubenchmark.net/cpu.php?cpu=Intel+Celeron+N2930+%40+1.83GHz). I also considered the Intel NUC Machines, but their broken firmware (that you have to upgrade before installing Linux) as well as uncertainty about the chipset some machines embed, dissuaded me to buy one. I also studied the Gigabyte machines, but I preferred Zotac for its processor having a better power over consumption ratio. This machine is a fanless barebone PC (so that you must add memory and a hard drive that are not in the box), ridiculously small (12.5 x 12.5 x 5 cm). Furthermore, it is well supplied in terms of connectivity (2 USB 2, 4 USB 3, SD Card, HDMI and DisplayPort, SATA, Ethernet, Audio In and Out, IR port). I added 4 GB of RAM and a 64 GB SSD. I paid € 235 for this configuration and added an Iiyama ProLite E2283HS-B1 monitor for € 125. So I have a € 360 configuration, compared to my previous € 2,400 PowerBook! Note that the machine is guaranteed for two years but Zotac extends this period to 5 years if you register the machine at this URL: http://www.zotac.com/support/warranty-manager.html . Don't forget to do it before 28 days after your purchase date!
Here are my notes while installing a Debian 8 Jessie on this machine. BIOS ConfigurationTo install Debian, you must first ensure that the machine boots on the USB port in legacy mode. So we must press ESC at boot time to go to the boot configuration screen and set the following settings:
Debian InstallationInstall Debian 8 Jessie XFCE with following CD image (take only CD 1):http://cdimage.debian.org/cdimage/weekly-builds/amd64/iso-cd/debian-testing-amd64-xfce-CD-1.iso. Copy the ISO on a USB stick with following command:
Problems encountered during installation:
Firmware for Wifi and Ethernet CardsThis machine embeds WiFi and Ethernet cards that are not supported by Debian without installing non-free firmware (and thus not embedded in the installation disk). And as this firmware if for network cards, it is not possible to download them. The installer then displays the following popups (in French):
Thus you must:
Plug this stick in one of the USB ports of the machine before starting the installation process. Pages to download the firmware are:
ConclusionGiven this setup, we can say that Linux support is good (the hardware is supported, sometimes with proprietary code). The only concern, that I know of, are:
After a week in use, I am very satisfied with this machine:
Thus, I highly recommend this machine with the mother of (almost) all distributions, namely Debian!
Enjoy! Last update: 2015-01-28 |